800-324-4505
800-880-0843
800-864-9066
PROVIDING QUALITY AND SERVICE; TODAY AND FOR YEARS TO COME!
Available at Alpha Process Sales - Louisiana
State of the Art Magnetic Liquid Level Indicators are a Direct Replacement for Less Reliable Devices and provide a Lifetime of Safe Liquid Level Indication.
Wide Variety of Accessories such as Liquid Level Switches, Transmitters, and other Liquid Level, Mass, Density, and Flow Devices.
PM-26 Liquid Level Gauge
PROMAG LTD FEATURED PRODUCT
MULTI POINT LEVEL SWITCH ARRAY
The BMA-30 Switch array is mounted to a PM-26 Liquid Level Gauge and is suitable for any application requiring closely spaced switch points. This combination is especially applicable to high temperature, high pressure boiler and steam drum applications.
Features & Benefits
The Rod Mounting allows the entire switch array to be easily positioned on the PM-26 Liquid Level Gauge. To simplify wiring, all internal switch leads are routed to a multiple screw terminal in a single field wiring housing.
BMA-30 is supplied with a with an insulated PM-26 Gauge. The assembly will be used in a boiler application to replace a "spark plug" type of device. The latching switch contacts will be used to directly control the existing pilot lamp annunciator panel used to indicate the boiler drum level. The lamps are arranged in a vertical column, thus representing the liquid level in a "bargraph" fashion.
LIQUID LEVEL GAUGE
PM-26 - LIQUID LEVEL GAUGE
-
Super Environmental and Personnel Protection
-
No Glass to Break
-
Full Vacuum to 4500 PSIG
-
-380 to 1000 deg F
-
Specific Gravity's as low as .35
-
Vessel Liquid Level Indication from 6 to 720 inches
-
Total Level and Interface Level Indication with the SAME Gauge
-
EVERY PM-26 Gauge is CUSTOM Built to customer specifications
-
UNIQUE FLUORESCENT INDICATOR can be seen from 30-50 Yards Away!
-
ULTIMATE FLASHING INDICATOR for the most reliable indication on the market today
-
SUPERIOR FLAG INDICATOR
-
STRONG MAGNETIC ATTRACTION between float and external indicators
Download - PM-26 Flag Indicator
MG-25 - LIQUID LEVEL GAUGE
The MG-25 Liquid Level Gauge operates on the principle of two magnetic fields interacting to transfer the height of Liquid Levels in vessels to a circular dial gauge indication.
LIQUID LEVEL SWITCHES & FLOW SWITCHES
ES-30 & ES-40 - ELECTRIC SWITCHES
-
Ease of Mounting and Adjustment - No special tools required!
-
Compact Design
-
Unique Magnetic Latching
-
Vibration Resistant
-
No Contact with Process Fluids
AS-35 & AS-50 - PNEUMATIC SWITCHES
-
Magnetic Coupling
-
Ease of Mounting and Adjustment
-
Positive Action
-
Integral Rapid Response, High Volume Relay
-
Field Reversible Switching Action
-
AS-35 Aluminum Amplifier Relay
-
AS-50 - All Stainless Steel Construction
LS-31 - LIQUID LEVEL SWITCH
-
No Seals to Leak
-
Hermetically Sealed Reed Switch Design
-
Electrically Serviceable without removal from the process
-
Corrosion Free Construction
FS-31 - FLOW SWITCH
-
The FS-31 is a Flow rate control device where the operation of the vane can be used to sound alarms or to activate various types of control equipment.
LS-85 / LS-86 - LIQUID LEVEL SWITCH
-
The LS-85 ( multiple float), and LS-86 (single float) switches are designed to be inserted into a nozzle that is located at the top of a process vessel.
LM-90 - LIQUID LEVEL SWITCH
-
The LM-90 Switch is designed to be flange mounted or may be fitted with a threaded mounting to be inserted into a top tank located nozzle. It may also be mounted into a bridle chamber external to the process vessel, or into an existing stilling well that is installed in the process vessel.
DLS - DISPLACER LEVEL SWITCH
-
EASILY INSTALLED - No physically long asseblies to install in tank.
-
MAY be CALIBRATED to ACTUAL SWITCHING LEVEL - Displacer may be moved on the suspending cable.
-
NO STILLING WELL - Since the Displacer does not float, wave action or turbulence on the liquid level surface does not affect the displacer.
-
ISOLATION from the PROCESS FLUID - The switch is magnetically operated through a Stainless Steel Sleeve.
-
CORROSION RESISTANT - Wide choice of construction materials to accomodate a variety of process fluids.
-
SERVICABLE - Electrical Switch may be serviced without removing the DLS from the process.
LIQUID LEVEL TRANSMITTERS
MST-C27, MST-I27, & MST-S27 - MAGNETOSTRICTIVE SERIES
MST-C27 - This transmitter is integrally mounted with a PROMAG PM-26 Liquid Level Gauge. The PM-26, used to measure liquid levels contains a float that monitor's the vessel's liquid level. This float has a magnet internally mounted that sets up a magnetic field around it's perimeter. It is this magnetic field that the MST-C27 senses, and in turn transmits a 4 to 20 mA signal relative to the float's position in the chamber.
MST-I27 - This configuration uses the same principle as the C27, but the float has a hole through it's center, and is installed around the sensing tube. The MST-I27 is inserted into the vessel instead of being mounted to a PM-26 chamber external to the vessel.
MST-S27 - The MST -S27 incorporates part of the two designs above. The float is contained in a stilling well that is lateral to the sensing tube. The entire device is inserted into the process vessel as in the MST-I27
CLT - MAGNETIC SWITCH SERIES
The CLT Sensing Element, when excited by a constant voltage, works as a voltage divider and provides a voltage output that is proportional to the Liquid Level being measured. This voltage is then measured by the PM-1000 transmitter located in the attached transmitter housing. The sensed voltage is then converted into a standard 4-20 mA current output. The PM-1000 Transmitter is a 2 wire Loop Powered Transmitter and is normally mounted at one end of the Sensing Element. Should it be necessary to remote mount the transmitter, 3 wires are required between the PM-1000 Transmitter and the Primary Sensing Element.
DIGITAL INDICATORS
900, 901, 903, 904, 910, & 911 - NEMA4X DIGITAL INDICATORS
-
Model 900 - 101 segment Bargraph Display
110 VAC or 220 VAC primary power - Supplies 24 VDC operating voltage to any loop powered transmitter.
-
Model 901 - Digital Display
110 VAC or 220 VAC primary power - Supplies 24 VDC operating voltage to any loop powered transmitter.
-
Model 902 - Digital Display with Integral PM-1000B CLT Transmitter
110 VAC or 220 VAC primary power - Designed for use with PROMAG CLT Transmitters. (CLT-x25 must be ordered with remote option). Supplies 24 VDC operating voltage to integral PM-1000B. Only 3 wires required between CLT sensing element and Model 902 Indicator.
-
Model 903 - Digital Display with Dual Alarms
110 VAC or 220 VAC primary power - Supplies 24 VDC operating voltage to any loop powered transmitter. Front Panel Alarm Lamps. Alarms may be set as High / Low, and adjusted from the front panel.
-
Model 904 - Digital Display with Dual Alarms / Integral PM-1000B CLT Transmitter
110 VAC or 220 VAC primary power - Supplies 24 VDC operating voltage to to integral PM-1000B. (CLT-x25 must be ordered with remote option). Only 3 wires required between CLT sensing element and Model 904 Indicator. Front Panel Alarm Lamps. Alarms may be set as High / Low, and adjusted from the front panel.
-
Model 910 - 3 1/2 Digit LCD Display
110 VAC or 220 VAC primary power - Supplies 24 VDC operating voltage to any loop powered transmitter. Features compact size. ( approx 8" high by 6" wide by 5" deep)
-
Model 911 - 3 1/2 Digit LCD Display / Auxillary 4/20 mA Output Terminals
110 VAC or 220 VAC primary power - Supplies 24 VDC operating voltage to any loop powered transmitter. Auxillary output terminals.
PDI - EXPLOSION PROOF DIGITAL INDICATORS
-
Model PDI-1101 Loop Powered 3 1/2 Digit LCD
Terminal Strip field wiring connection. 1/2" High Display. Minimal Loop Voltage Drop (2.2 VDC Typical)
-
Model PDI-1100T Loop Powered 3 1/2 Digit LCD with Integral PM-1000B Transmitter
Designed for use with PROMAG CLT-x25 Liquid Level Transmitters. CLT must be ordered with Remote Option. 1/2" High Display. Minimal Loop Voltage Drop (2.2 VDC Typical)
-
Model PDI-1100PS - 3 1/2 Digit LCD with Integral Loop Power Supply
110 VAC or 220 VAC primary power - Supplies 24 VDC operating voltage to any loop powered transmitter. 1/2" High Display. Minimal Loop Voltage Drop (2.2 VDC Typical)
PRESSURE POWERED PUMPS
AUTOPUMP - ULTRA SAFE LIQUID PUMPING & COLLECTION
-
ULTRA SAFE
-
Local IndicationNo glass to leak
-
Temperature ranges from
-
-300 Deg F to 1000 Deg F
-
Pressure capabilities from full vacuum to 10,000 psi
-
Custom built from 3/4 Gal to 50 Gal
-
Pump fluids to distance and heads equal to the pressurizing medium.
-
Maintenance Free Reduces costly inventory
-
Reduces costly down time
-
Leak- Free Seal Free
-
Safety Plus
-
Built to ASME Code
-
Lower utility cost
LIQUID MASS & DENSITY SYSTEMS
ACCUMASS - CMT-30 Continuous Mass Transmitter
-
Highly Accurate Liquid Mass measurement without the need for temperature compensation.
-
Sectioned Displacer Design for ease of Shipment and Installation
-
Process Compatible Materials
-
Not Sensitive to Wave Action.
-
Single Point Analog Output
-
Multi Point Microprocessor based Monitoring
ACCUDEN - CDT-30 Continuous Density Transmitter
-
The CDT-30 Accuden system closely resembles the CMT-30 Mass System described above. The major difference is that the CDT-30 displacer must be completely covered and that the instrument measures Liquid Density (Specific Gravity) instead of Mass.
-
Displacers are generally constructed in shorter lengths, and installed in tanks or bridle chambers that remain full. The vessel on which the CDT-30 system is installed usually has a low flow entering from the bottom of the vessel, and overflowing into an outlet line near the top of the vessel. Utilized in this way, the CDT-30 can continuously sample Liquid Density.
-
CDT-30 Systems have been applied in applications ranging from Tomatoe Paste density to measuring Hydrochloric Acid concentrations in a range as low as .05 Specific Gravity.
