Oil Water Separators
At Hudson Industries Limited, we understand that the decisions we take today have a huge impact on the global environment. Clean water is a vital resource. This is why we have focused on industrial and environmental oil water separation. Our company has been open for business since 1982.
HUDSON IND. FEATURED PRODUCT
Flowrates 1 to 5000 GPM
As low as 10 ppm oil in water concentration
Efficiently remove free-floating oil, grease and settle-able oily coated solids from oil/water discharges.
All separators are constructed
to API specifications.
Features & Benefits
•Effective free oil removal to 10 mg/l or less
@ 20 micron
• No costly cartridges or filter elements to replace.
• Coalescing media requires only periodic cleaning
• Fully automatic operation
• High efficiency coalescing module
• Operating temperature to 205°F
• Operating pressures to 600 psi
• Flow diffusion baffle for even
flow distribution at the inlet
• Constructed for Durability
• High-performance phenolic epoxy interior coating for maximum protection
• Heavy mild steel construction: ASME Section VIII “U” Stamp Vessels, Structural Steel Bases
• The separator can handle 100% oil slugs on a limited basis
• Stainless steel hardware• Permanent ID plates
PRINCIPLE OF OPERATION
Oil and water influent is induced through the standpipe to the tank interior. The influent is evenly distributed by the flow diffusion baffle before entering the coalescing module. The module, being oleophilic, begins to attract the oil droplets which in turn begin to bod or coalesce into larger droplets. These large droplets continue to rise where they form a layer of oil on the surface.
The separator employs a continuous acting rotary pipe oil skimmer to remove the oil from the surface and deposit it into the oil separation tube. The majority of the water which may have been removed with the skimmed oil separates back out into the waste stream. The separated oil then discharges out of the separator.
The water continues through a series of underflow and overflow baffles before discharging from the unit.
OIL WATER SEPARATOR OPTIONS
SLOTTED PIPE SKIMMER
The Rotatable Slotted Pipe Skimmer (RSPS) is the simplest and most economical method available and is used extensively in municipal and industrial wastewater installations.
The RSPS is located at the end of a separation bay. The RSPS is rotated and then collects
the oil under weir flow conditions.
Automatic Skimming brought to you by the original grooved drum skimmer, imitated by many. This innovative design maximizes the available surface area for harvesting oil from the water surface while providing decades of reliable service.
FLOATING INTAKE SKIMMER
Deploy Almost Anywhere - Hands off surface oil skimming in any tank, pond, basin or body of fluid.
COALESCING MEDIA PACK
Oleophilic media enhances oil droplet coalescence for enhanced separation. Coalescing media will need to be replaced over time. Please contact us today if you need replacement media to keep your separator working at its best.