PROVEN LEADERSHIP, HARD WORK & INNOVATION ALIVE AND WELL IN NORTH AMERICA

Available at Alpha Process Sales - Texas

Asset 2.jpg

Rittal designs and manufactures the world’s leading industrial and IT enclosures, racks and accessories, including high efficiency, high density power management and climate control systems for industrial, data center, outdoor and hybrid applications. Rittal’s off-the-shelf standard, modified standard and custom-engineered products are known throughout the world as high-quality, affordable solutions for practically any industrial or IT infrastructure application – from single enclosures

LEARN MORE

ASSEMBLY
FRAMES
WIRE PROCESSING
GUIDE
COOLING UNITS
GUIDE
CHILLERS
BROUCHURE
MODULAR ENCLOSURES
HEATERS
BROUCHURE
JUNCTION BOX &
WALLMOUNT SPEC
HAND
TOOLS
MATERIAL
HANDLING GUIDE
MACHINING
BROUCHURE
AIR TO AIR HEAT
EXCHANGERS
WIRE TERMINAL
BROCHURE

RITTAL'S FEATURED PRODUCT

Heat Exchangers

Rittal Air-to-Water Heat Exchangers feature adaptive options for mounting in production areas, including hygienic design. They also include flexible water connection options.

The process of heat exchange is simple: air temperatures within an enclosure are modified by actions from the outside. Air/water heat exchange is simple, effective and efficient. With the aid of cooling water, the air inside an enclosure can be cooled to below the level of the ambient temperature. Air/air heat exchangers are for environments where ambient air temperature is at or below the desired interior temperature of the enclosure. And, as closed systems, no external dust or contaminants penetrate the enclosure. The liquid cooling system may be connected directly to an independent circuit or a facility system. Either system can be mounted on an enclosure’s roof or walls using the same mounting cutouts for cooling units and heat exchangers. Included here are popular sizes and configurations.

Climate Control2.jpg

Features & Benefits

  • Controllers can track temperature control, leak detection, fault signal contact

  • ​Closed loop design protects against outside contaminants

  • Can be mounted on enclosure wall or roof

  • Corrosion resistant, as air/water heat exchangers are available with stainless steel water-carrying parts

  • Two separate air circuits prevent dust and pollutants in ambient air from entering an enclosure interior

  • Mounts to enclosures’ exterior wall

  • Up to 30% slimmer wall-mounted units reduce space requirements

  • From 300 to 5000 watts useful cooling capacity

  • Filters available for a variety of installation environments

  • Digital controls for thermostats

  • Fast installation thanks to identical mounting cut-outs for cooling units, air/air heat exchangers and air/water heat exchangers

FILTER
FANS
RiLine60 PLUS BROCHURE
RiLine COMPACT
BROCHURE
RiLine60 COMPACT
FLAT BROCHURE
FREESTANDING & FLOOR MOUNTED ENCLOSURES
DISCONNECT ENCLOSURES BROCHURE
CLIMATE CONTROL
BROUCHURE

MODULAR ENCLOSURES

MORE INTERNAL SPACE, RUGGED DURABILITY
Modular enclosures provide the protection required for industrial drives, controls and other equipment. They deliver the practical flexibility to evolve with the changing demands of modern business—all while saving money over the course of their lifecycles.
TS 8 BAYING SYSTEMS

TS 8 baying system, made from sheet steel, saves considerable space and facilitates easy internal installation. It also allows a baying arrangement on all sides. In addition, the integrated, automatic potential equalization of all enclosure panels and the triple machining of the surface ensures maximum safety.

TS 8 FLOORMOUNT

TS 8 combines the strength of unibody floor mount enclosures with the flexibility of Rittal's revolutionary modular design. With its double door configuration and wide range of accessories, Rittal's floor mount TS 8 is sure to meet your application needs.

TS 8 FLANGE MOUNT DISCONNECT

Offering mechanical interlock where doors cannot be opened while system is energized and all doors must be closed to power the system ON. Simplified installation, slimmer flange door providing access behind the operator handle. Adapter plates for high and low amperage handles available.

TS 8 ELECTRONIC

TS 8 baying system with hinged front frames and 19" profile rails.

TS 8 Flange Mount Disconnect Enclosure.j
TS 8 BAYING SYSTEMS.jpg
TS 8 freestanding enclosures.jpg
Baying systems TS 8 Electronic enclosure
 

WALLMOUNTED ENCLOSURES

Enclosures Feature Certified Protection, Durable Components
NEMA protection ratings are ensured through a secure locking system, foamed-in-place gasket and knife edge perimeter. Features include a body constructed of cold rolled steel, steel doors and zinc-plated mounting panels
WM SERIES WALL MOUNTED ENCLOSURE

The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

WM WALLMOUNTED ENCLOSURE SLOPE TOP

The WMS slope top wall mount enclosure is designed for any environment that requires frequent washdowns. The 20 degree overhanging sloped roof prevents water from accumulating on top of the enclosure and door opening.

WM WALLMOUNT DISCONNECT ENCLOSURE

These flange mount disconnect wall mount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

HYGIENIC DESIGN COMPACT ENCLOSURE HD

Housing solution tailored to requirements of the food and beverage industry. Roof angled forward by 30°. Seal dyed blue to clearly distinguish it from debris.

JUNCTION BOXES JB STAINLESS STEEL

The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.

KX SMALL HOUSING E-BOX KX SHEET STEEL

Door: Carbon steel all-round foamed-in PU seal
Housing: Carbon steel

Mounting plate: Zinc-plated
Housing and door: Dipcoat primed powder-coated on the outside textured paint

HYGIENIC DESIGN HD TERMINAL BOXES

Housing solution tailored to requirements of the food and beverage industry. No gaps between the housing and lid due to the all-round silicone seal. Hygienic hexagon quick-release lock

AX COMPACT CONTROL CABINET

System perfection. The new carbon steel compact enclosure AX offers maximum data quality and consistency in engineering, flexibility, and safety in assembly and interior installation.

COMPACT ENCLOSURES AE

Housing with door of sheet steel, spray-finished with mounting plate and flange (gland) plate in the base. Protection category up to IP 66.

AE WALL-MOUNTED HOUSINGS

Wall-mounted housing for small networks with fixed 19" mounting level and flange plate with brush strip for cable entry at the bottom. Protection category IP 55.

KX SMALL HOUSING KX BUS HOUSING

Housing: Carbon steel
Cover: Carbon steel all-round foamed-in PU seal
Viewing window: Polycarbonate 4 mm1

PK POLYCARBONATE HOUSINGS w/OUT KNOCKOUTS

Housings made from fiberglass-reinforced polycarbonate with either gray or transparent cover.

PUSHBUTTON BOXES PB

The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

KL TERMINAL BOXES w/OUT GLAND PLATE

Spray-finished housing with sheet steel cover, without gland panel. Protection category IP 66.

KS PLASTIC ENCLOSURES

Wall-mounted housing with door of fiberglass-reinforced, non-saturated polyester, with mounting plate. Optionally with or without glazed door. Protection category IP 56 or IP 66. Infinite mounting plate depth adjustment, thanks to multiple mounting levels in the enclosure. Flexible interior door configuration using press-fitted mounting bosses in the door. High stability thanks to use of fibre-glass reinforced plastic.

E-BOX EB

Wall-mounted housing with door and mounting plate made from sheet steel. Protection category IP 66. With 180° hinge. Lock insert may be exchanged for individual lock systems.

Ex ENCLOSURES SS EMPTY ENCLOSURE w/HINGED DOOR

Ex Housing with Hinged Door, Stainless Steel

Ex ENCLOSURES STAINLESS STEEL

Ex Housings with Screw-Fastened Cover, Stainless Steel

WMS slope top.jpg
WM series.jpg
Wallmounted enclosure for Disconnect.jpg
Hygienic Design Compact enclosure HD.jpg
KX small housing E-box KX, sheet steel.j
Hygienic Design HD Terminal Boxes.jpg
Junction boxes JB Stainless steel.jpg
AX compact control cabinet.jpg
Compact enclosures AE.jpg
AE Wall-Mounted Housings.jpg
KX small housing KX bus housing.jpg
PK Polycarbonate Housings without knocko
Pushbutton boxes PB.jpg
KL Terminal Boxes without gland plate.jp
KS Plastic Enclosures.jpg
E-Box EB.jpg
Ex Enclosures Stainless steel, empty enc
Ex Enclosures Stainless steel.jpg
 

FREESTANDING/FLOORMOUNTED ENCLOSURES

Get the Enclosure You Need
Select from raised and removable 12" floor mounts or freestanding enclosures with or without base/plinth panels. All models offer modular design flexibility and full size mounting capability.
SE 8 FREE-STANDING ENCLOSURE SYSTEM

Individual sheet steel enclosure with stable enclosure body, two integrated mounting levels, screw-fastened rear panel and door. Roof and sides from a single piece with roll-formed frame. Fully compatible interior installation with the TS 8, enabling full integration into the TS 8 product family. Enclosure widths ranging from 600 to 1800 mm. Time-saving assembly work due to the roll-formed side panels

CM COMPACT SYSTEM ENCLOSURES

Housing with door made from sheet steel with mounting plate and open base to accommodate base plates. Protection category IP 55. A symbiosis of the enclosure benefits of Rittal compact enclosures, and the configuration diversity of the TS 8 baying enclosure system. Perforated mounting strips in the door for fast attachment of support strips, cable conduit holders and covers.

CS NEW BASIC HOUSINGS

Single-walled housing systems, one-door and two-door. Ready for use for all applications with passive interior equipment or low power dissipation in outdoor areas. Roof concept with all-round louvred grilles

CM Compact System Enclosures.jpg
CS New Basic Housings.jpg
SE 8 free-standing enclosure system.jpg
 

DISCONNECT ENCLOSURES

Safety and Protection
Rittal's disconnect enclosures provide a mechanical interlock where doors cannot be opened while system is energized.  These enclosures provide personnel safety, protect electrical components and support the addition of a flange-mounted disconnect handle.
TS 8 FLANGE MOUNT DISCONNECT ENCLOSURE

Offering mechanical interlock where doors cannot be opened while system is energized and all doors must be closed to power the system ON. Simplified installation, slimmer flange door providing access behind the operator handle. Adapter plates for high and low amperage handles available.

TS 8 FLANGE MOUNT DISCONNECT FLOOR MOUNT ENCLOSURE

Rittal's Floor mount TS 8 combines the strength of unibody floor mount enclosures with the flexibility of Rittal's revolutionary modular design. With its double door configuration and wide range of accessories, Rittal's Floor mount TS 8 is sure to meet your UL Type 12 needs.

WALL MOUNTED ENCLOSURE for DISCONNECT

These flange mount disconnect wall mount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

TS 8 Flange Mount Disconnect Enclosure.j
TS 8 Flange Mount Disconnect Floormount
Wallmounted enclosure for Disconnect.jpg
 

HYGIENIC DESIGN SOLUTIONS

Improve Compliance and Equipment Uptime
Rittal understands the challenges of meeting FSMA compliance and keeping your operations running at peak efficiency. Our Hygienic Design Solutions deliver full protection from caustic washdowns and thermal management to keep your vital equipment running.
AIR/WATER HEAT EXCHANGERS WALL-MOUNTED HD

Air/water heat exchanger for production areas in the food and beverage industry where hygiene is important - the perfect addition to the Rittal Hygienic Design range. The easy-to-clean design reduces the risk of contamination and ensures food safety.

HOSE-PROOF HOOD for a HIGHER PROTECTION CATEGORY

IP 56 when fitted over fan-and-filter unit/outlet filter with filter mat

CAM LOCK HD

Hygienic Design version for easy, safe cleaning.

ENCLOSURE KEY HD

HD enclosure key for HD cam lock.

HINGE HD

To be used in exchange in HD enclosures with internal hinges.

HD LEVELING FEET w/o BASE MOUNTING

HD leveling feet to minimize cleaning time thanks to fully covered, permanently sealed thread. Also compensates for floor inclines of up to 10° thanks to the flexible base plate. Design to EHEDG standards.

T-HANDLE HD

For easy opening without keys. As a replacement for all enclosures with cam lock.

HD WALL SPACER BRACKET

The HD wall spacer bracket creates space for cleaning behind the enclosure.

CABLE GLAND HD

HD cable gland IP 68 (5 bar, 30 min) - IP 69K to DIN 40 050-9.

AirWater Heat Exchangers Wall-mounted HD
Cam lock HD.jpg
Hinge HD.jpg
T-handle HD.jpg
1Cable gland HD.jpg
Hose-proof hood for a higher protection
Enclosure key HD.jpg
HD Leveling Feet.jpg
HD Wall Spacer Bracket.jpg
 

POWER DISTRIBUTION

Reliable Power Distribution
Rittal offers forward-thinking solutions for modern low-voltage distribution. These include small distribution boards, individual switchgear and control boards, to high-current power distributors for industrial applications.
RiLine COMPACT

RiLine Compact is ideal for small control panel applications below 100A. It delivers optimal, tool-less assembly and a maintenance free solution. 

MINI PLS

Space Saving Power Distribution. Mini-PLS provides simple power distribution for systems up to 250A.

RiLine60 FLAT

RiLine Technology for the Global Market. The RiLine 60 flat power distribution system is easy to use solution that is globally certified for up to 800A.

RiLine60 PLS

The Rittal busbar system is tested to the IEC 61 439-1 international standard.

MAXI and FLAT PLS

To be used in exchange in HD enclosures with internal hinges.

POWER DISTRIBUTION ACCESSORIES

Future-proof Power Distribution. Rittal offers a large assortment of tested and certified busbar accessories to provide flexibility in power distribution system design.

RiLine%20Compact_edited.jpg
RiLine60%20Flat_edited.jpg
Maxi%20and%20Flat%20PLS_edited.jpg
Mini%20PLS_edited.jpg
RiLine60%20PLS_edited.jpg
Power%20Distribution%20Accessories_edite
 

CLIMATE CONTROL

Leading the World in Climate Control Efficiency
Rittal meets the demand for reduced energy consumption with greener solutions and reduced costs.
FILTER FANS

Air Cooling Fans. Rittal Filter Fans, for surface or roof mounting, are made to match your precise requirements. Fans include a standard cutout size and tool-free mounting. EC technology is available for regulated energy use.

AIR to AIR HEAT EXCHANGERS

Improve Your Thermal Management. Rittal offers a fully-wired wall mounted heat exchanger with controller and digital temperature display.

COOLING UNITS

Multiple Options with a Focus on Energy Efficiency. Rittal’s cooling solutions include compact, targeted cooling for smaller hot spots with our thermoelectric units, energy efficiency with our Blue e family of products, and cutting edge hybrid technology and maximum energy efficiency with our Blue e+ family of products.

HEATERS

Heaters Tailored to your Application. Rittal heaters are ideal for panels and small enclosures. Options include continuous thermal output with or without a fan.

AIR to WATER HEAT EXCHANGERS

Heat Exchangers. Rittal Air-to-Water Heat Exchangers feature adaptive options for mounting in production areas, including hygienic design. They also include flexible water connection options.

CHILLERS

Chillers Excel in IT and Industrial Applications. Rittal Chillers feature modular space-saving designs with icing-protection. For many industrial and IT applications, they provide an economical and efficient cooling option.

CLIMATE CONTROL ACCESSORIES

Accessories For Climate Solutions. Rittal offers a complete line of system accessories to improve efficiency and installation.

Filter Fans.jpg
Air to Air Heat Exchangers.jpg
Cooling%20Units_edited.jpg
Heaters.jpg
Chillers.jpg
Air to Water Heat Exchangers.jpg
 

AUTOMATION SYSTEMS

Automated Processing of Wiring
Increase efficiency, improve quality and maximize revenue with Rittal Automation Systems.
MACHINING

Rittal Perforex Automates Panel Building. The Rittal Perforex machine automates traditionally expensive and manual tasks involved in modifying enclosures and back panels. As a result, panel builders reduce waste and labor to improve their bottom line.

TERMINAL BLOCK ASSEMBLY

Automated Processing of Wiring. The portfolio of RAS Wire Processing machines cuts wires to length, strips insulation from end of wires and strips/crimps wire ferrules to the end of wires.

WIRE PRPCESSING

Automated Processing of Wiring. The portfolio of RAS Wire Processing machines cuts wires to length, strips insulation from end of wires and strips/crimps wire ferrules to the end of wires.

MATERIAL HANDLING

Ergonomic Solutions for Transport and Assembly. Mobile and flexible, Rittal Material Handling equipment smooths transport, assembly and commissioning of modification operations.

HAND TOOLS

Rittal Engineered Precision Tools. Rittal has a comprehensive range of hand tools to support enclosure manufacturing.

Machining.jpg
Terminal Block Assembly.jpg
Wire%20Processing_edited.jpg
Material Handling.jpg
Hand%20Tools_edited.jpg
 
  • w-facebook
  • Twitter Clean
Material Handling

Material Handling

Go to link